KIA Niro: Before driving
READ NEXT:
Necessary vehicle inspections
Be sure to check the following fluid levels
on a regular basis at the exact interval:
Engine oil
Engine coolant
Brake fluid
Washer fluid
For more details, refer to "Maintenance"
WARNING
Focus on the road while driving. The
Good driving practices
Never change the gear from P (Park)
or N (Neutral) to any other position
with the accelerator pedal depressed.
Never change the gear into P (Park)
when the vehicle is moving.
Stop the vehicle completely before
changing the gear into R
Good braking practices
Be sure the parking brake is not
engaged and the parking brake indicator
light is off before driving.
The vehicle will not stop as quickly if
the brakes are wet. Apply the brakes
lightly until the braking action returns
to normal.
Do
SEE MORE:
External AMP | Roof Antenna | AVN Remote Controller
Connector Pin Information
External AMP Repair procedures
Removal
Remove the main crash pad.
(Refer to Body - "Main Crash Pad Assembly")
Remove the external amplifier (A) after loosening the mounting bolts and
Power Cable (HPCU-HSG, Electric /C Compressor). Main High Voltage Battery System, Sub High Voltage Battery System
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Shut off the high voltage.
(Refer to "High voltage Shut-off Procedures")
Disconnect the motor power cable connector (A) and HSG p
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us
