KIA Niro: Safe Exit Assist settings

KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual / Driving your vehicle / Safe Exit Assist (SEA) / Safe Exit Assist settings

Exit Safety

Exit Safety

Kia NIRO Hybrid

Exit Safety

Kia Niro EV

Exit Safety

A: Driver Assistance

  1. Driving Safety
  2.  Exit Safety

With the vehicle on, touch Settings ? Driver Assistance ? Warning Volume on the instrument cluster or Settings ? Vehicle ? Driver Assistance ? Driving Safety ? Exit Safety on the instrument cluster or Settings ? Vehicle ? Driver assistance ? Driving safety ? Exit safety on the infotainment system.

WARNING

The driver should always be aware of his or her surroundings. If Exit safety is deselected, Safe Exit Assist cannot assist you.

CAUTION

When the trailer is connected, Safe Exit Warning automatically turns off (if equipped). In this case, you cannot get help from Safe Exit Warning. Always drive with care.

NOTICE

If the vehicle is restarted, Safe Exit Assist will maintain the last setting.

Warning volume- (Kia Niro EV only)

Warning volume

Warning volume

A: Driver assistance

  1. Warning volume
  2. Driving safety priority
  3. High
  4. Medium
  5. Low
  6. Off

With the vehicle on, touch Settings ? Vehicle ? Driver assistance ? Driving safety ? Warning volume on the infotainment system to change the Warning volume to adjust the Warning volume levels; High, Medium, Low or Off.

If Driving safety priority is selected, the audio volume will temporarily decrease to warn the driver with the audible warning for safe driving.

NOTICE

  • If you change the Warning volume, the Warning volume of other Driver Assistance systems may change.
  • If Off is selected, steering wheel vibration will not turn off.

    READ NEXT:

     Safe Exit Assist operation

    Safe Exit Assist warns the following actions. Collision warning when exiting vehicle Safe Exit Assist linked with Electronic child safety lock Collision warning when exiting vehicle A: Watch for traffic The warning light on the

     Safe Exit Assist malfunction and limitations

    Safe Exit Assist malfunction A: Check blind-spot safety systems When Safe Exit Assist is not working properly, the warning message will appear on the cluster for several seconds, and the master ( ) warning light will appear on the cluster.

     Manual Speed Limit Assist (MSLA)

    Speed Limit indicator Set speed You can set the speed limit when you do not want to drive over a specific speed. If you drive over the preset speed limit, Manual Speed Limit Assist operates (set speed limit will blink and chime will

    SEE MORE:

     Main High/ Sub High Voltage Battery

    Main High Voltage Battery Component Location Power Relay Assembly (PRA) Cell Monitoring Unit (CMU) Battery Temperature Sensor Runaway Arresting Device (RAD) Warning Main Relays (Positive, Negative), Pre-Charge Relay, Pre-Charge R

     Coolant Repair procedures

    Warning Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator. Warning When pouring engine coolant, shut the relay box lid and be careful not to spil

    Categories

    2022-2025 © - www.infoniro.com | Policy