KIA Niro: ENGINE START/STOP button (Kia NIRO Hybrid)
Operation
- OFF
- Press the ENGINE START/STOP button in P to turn the vehicle off.
- ACC (Accessory)
- Press the ENGINE START/STOP button once without depressing the brake pedal.
- The electrical accessories can be operated.
- Turns off automatically after approximately 1 hour to prevent battery discharge.
- ON
- Press the ENGINE START/STOP button twice without depressing the brake pedal.
- The warning lights can be checked.
- START/RUN
- Press the ENGINE START/STOP button while depressing the brake pedal in P (Park).
- Start the engine in P for the safety.
WARNING
- Never press the ENGINE START/STOP
button while the vehicle is in motion.
This would result in loss of directional control and braking function, which could cause an accident.
- Before leaving the driver's seat,
always make sure the gear is shifted to P (Park)
position, set the parking
brake fully and shut the engine off.
Unexpected and sudden vehicle movement may occur if these precautions are not taken.
- Never reach for the ENGINE START/ STOP button or any other controls through the steering wheel while the vehicle is in motion. The presence of your hand or arm in the area could cause loss of vehicle control, an accident and serious bodily injury or death.
- Do not place any movable objects around the driver's seat as they may move while driving, interfere with the driver and lead to an accident.
NOTICE
If you leave the ENGINE START/STOP button in the ACC or ON position for a long time, the battery will discharge.
If you press the ENGINE START/STOP button without pressing the brake pedal, the engine will not start and the ENGINE START/STOP button changes as follow: OFF ? ACC ? ON ? OFF or AC
ENGINE START/STOP button interlock system (if equipped)
The ENGINE START/STOP button will not change to the OFF position unless the vehicle is in P (Park).
Vehicles equipped with anti-theft steering column lock
ENGINE START/STOP button interlock system (if equipped)
- The vehicle is in the OFF position
- The doors are opened
CAUTION
In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times repeatedly within 3 seconds If the vehicle is still moving, to restart the vehicle:
- Press the ENGINE START/STOP button when vehicle speed is 5 km/h (3 mph) or over
NOTICE
- If the steering wheel doesn't unlock properly, the ENGINE START/STOP button will not work. Press the ENGINE START/STOP button while turning the steering wheel right and left to release the tension.
- You are able to turn off the engine (START/RUN) or vehicle power (ON), only when the vehicle is not in motion.
READ NEXT:
Starting the engine with smart key
The vehicle will check for the smart key
when:
The vehicle doors are opened
The ENGINE START/STOP button is
pressed
If the smart key is not in the vehicle, the
indicator ( ) and the message will
appear on the instrument cluster.
WARNIN
Dual clutch transmission
Shift lever type
Depress the brake pedal and the
lock release button when shifting.
Press the unlock button when
shifting.
The shift lever can be shifted
freely.
P (Park)
R (Reverse)
N (Neutral)
D (Drive)
Operation
Depress
SEE MORE:
Parking Brake Cable Repair procedures
Removal
Turn ignition switch OFF and disconnect the negative (-) battery
terminal.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
Remove the knee air bag.
(Refer to Restraint - "Knee Airbag(KAB) Module&q
Rheostat | Front Fog Lamps Repair procedures
Connector and Terminal Function
Rheostat Repair procedures
Removal
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
Remove the crash
Categories
- Home
- KIA Niro EV, Hybrid - Second generation - (SG2) (2021-2024) - Owner's manual
- Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual
- Contact Us