KIA Niro: Vehicle Identification

Vehicle Identification Number (VIN)

Kia NIRO Hybrid

Type A - For hybrid vehicle
Type A - For hybrid vehicle

Type A - For plug-in hybrid vehicle
Type A - For plug-in hybrid vehicle

Type B
Type B

Kia Niro EV

Type A
Type A

Type B
Type B

The Vehicle Identification Number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

  • Type A: Engraved on the floor under the front left or right seat. Open the cover to check the VIN.
  • Type B: Written on a plate attached to the top left or top right of the dashboard through the front windshield.

Vehicle certification label (if equipped)

Type A
Type A

Type B
Type B

The vehicle certification label attached on the center pillar as shown gives the vehicle identification number (VIN).

    READ NEXT:

     Tire specification and pressure label

    Type A Type B The tire label located on the center pillar as shown gives the tire pressures recommended for your vehicle. The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. Motor number (

     How to check the symbol on the charging label (For Europe) (if equipped)

    Vehicle charging INLET Charging connector OUTLET Symbol location and application example Precautions for charging AC and Trickle charger (Portable charging cable) (AC charging) After opening the charging door, check the chargi

     Kia Niro - First generation - (DE) (2017-2022) - Service and Repair Manual

    The Kia Niro First Generation (2017-2022) is using the electrical energy that is charged & stored inside the high voltage battery. This method prevents air pollution since fuel, like gasoline, is not required, negating the emission of exhaust gas

    SEE MORE:

     Fuel Sender Repair procedures

    Removal Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") Disconnect the fuel sender connector (A). Lift the fixing hook (A) by using a common driver, and then remove the fuel sender (B).

     Power Cable (HPCU-HSG, Electric /C Compressor). Main High Voltage Battery System, Sub High Voltage Battery System

    Turn ignition switch OFF and disconnect the negative (-) battery cable. Shut off the high voltage.   (Refer to "High voltage Shut-off Procedures") Disconnect the motor power cable connector (A) and HSG p

    Categories